![background image](http://html.mh-extra.com/html/gaui/r5/r5_instruction-manual_570302041.webp)
P.37
Main body & Landing plate assembly
機殼腳板組裝
M2.6x6
1
#057032
1
1. Inserting to the frame baseplate. Confirm no interference on 90 degree turning
2. Confirm neutralization of servo, trimming for perfect fitting of baseplate and body,
tighten screw M2.6x6.
3.Adjust both collars for proper force from both silicon tubes, which will keep landing
pad stay in position with proper play during flight (make sure the landing pad with
correct retracting movement, see Page 38 Retractor servo inspection)
1.將 插入底座至底,並確認90度旋轉不干涉。
2.確認伺服機中立並調整底板與機殼切齊後,再將M2.6x6螺絲鎖緊。
3.請調整拉桿兩端襯套固定距離,控制膠管與中央轉接柱的緊度,可避免飛行當中出現
底板晃動過大,影響飛行速度並保持一定的彈性(確認調整後的底板作動正常並符合
P.38檢查事項)。
1
1
6
M2.6x6
#0R7206
x1 pcs