P.12
Main structure assembly
主體結構組裝
1. Assemble and tighten screws by the instructions.
2. Check and ensure no wires in the bottom side of frames, to avoid any interference
during battery sliding in.
3. Input voltage of GS-097 is 4.8V~6.0V. Please must lower the voltage if the high
voltage system been used on this aircraft, to avoid GS-097 get burnt.
1.依圖示組裝並鎖緊螺絲。
2.檢查機體底框內外緣不可有線材纏繞或懸掛，避免電池滑入時干涉或與機殼干涉。
3.GS-097使用電壓範圍為4.8V~6V，如您使用高壓電裝系統請進行降壓以避免GS-097故障
或燒毀。
11
#054002
1
1
M2x5
M3x6
M3x6
#0R1306
x4 pcs
6
5
M2x5
#0R1205
x4 pcs