GAUI
G A UI
T AI SHIH HOBB Y CORPOR A TION
G A UI
T AI SHIH HOBB Y CORPOR A TION
P.5
ESC
Motor
No1,3
No2,4
將軸管確實插入馬達艙定位點(軸管必須突出塑膠)，然後鎖緊螺絲並蓋上蓋子及套子。
若採用330X動力系統(10A ESC)，請注意電源線必須伸出管外，若長度不夠可自行延長或另購電源延長
線。
機身製作
機身製作
電源延長線
馬達線與ESC接法皆相同，接好後必須以膠帶固定。
Main Frame Assembly
Insert boom into Motor base, attention on Position Indicator Gap, tighten screws and insert
VCP Cap & plastic lid cover.
If your are using 330X power system (10A ESC & motor from 330X), note the power cable
must extend itself outside of boom arm. If length is not enough you need to add a power
extension cable.
Main Frame Assembly
Power extension cable (Item#222170)
Motor 1&3: Connect RED to RED, YELLOW to YELLOW, BLACK to BLACK.
Motor 2&4: Connect RED to BLACK, YELLOW to YELLOW, BLACK to RED.
After connecting Motor/ESC power/signal cables.
Secure cable connections with tapes.
