7 Pin Plug
Extra for Flat 12 Pin Plug
Pin
1
2
3
4
5
6
7
Pin
8
9
10
11
12
Connection
Left Indicator
Auxiliary or Reverse Light
Earth
Right Indicator
Electric Brakes
Stop Light
Tail Lights
Connection
Left Indicator
Auxiliary or Reverse Light
Earth
Right Indicator
Electric Brakes
Colour
Yellow
Black
White
Green
Blue
Red
Brown
Colour
Orange
Pink
White
Grey
Violet
Common Trailer pin configurations
(Always check your individual trailers wiring in case its not standard)
1
6
5
3
2
7
4
4
7
2
3
5
6
1
1
1
2
3
2
3
7
7
4
5
6
6
5
4
1
6
5
3
10
11
7
4
2
12
9 6
1 6
5
6 9
3
10
2
11
7
12
4
7 Pin Flat
7 Pin Round
12 Pin Flat
Socket View
Plug View
Socket View
Plug View
Socket View
Plug View
P3
P4
Menu structure
Press the (Menu) Button once to enter the menu system. Use the Ch3 and Ch4 to
navigate up or down the menu. Use the Ch3 and Ch4 buttons to navigate within the
sub menu then press the Mode button to change to the highlighted setting.
Press the menu button to exit a Menu or a Sub Menu.
Note: the menu only displays 4 features at a time scroll down past the last menu item to
reveal the next feature.
The menu structure is in the following sequence.
Language
Reversing Delay (can also be used for blind spot cameras),
Power Off Screen
TV Mode
Turnover
System Recovery
Firmware Version
Back light adjustment.
To finish you must exit the menu system by pressing the Menu button.
Menu item descriptions.
1. Language:
Selects between English and Chinese
2. Reversing delay (this is a global setting that works on all channels/cameras:
A delay off can be set for all cameras channels of up to 10 seconds. This sets the Switch
off time after the Trigger is removed. This function only operates when a camera is
Triggered. For example the vehicle is in reverse and so the back up light wire of the car
triggers the back camera to turn on automatically or switch from another channel across
to the backup camera. When the trigger is lost ( the vehicle is taken out of reverse) the
Image is normally switched off or the monitor returned to its previous state. A delay time
allows the camera to stay on for a prescribed amount of seconds after the trigger is lost.
Using delay for blind spot priority when changing lanes.
The off delay can be used to
keep a camera on when a trigger is intermittent like in the case of using the indicator bulb
positive as a trigger to turn on a camera that views the blind spot on that side of the
vehicle. When set to as little as 3 seconds the camera will stay on when changing lanes
with the indicator on even though the trigger is not constant (on/off, on,off etc etc).
3. Power Off Screen
This sets the time between 1,3 and 5 min till the monitor switches off when there is no
signal.
4. TV mode:
NTSC or PAL selectable
5. Turnover:
Ch1/ Ch2/ Ch3/ Ch4. Use the Ch3 and Ch4 to select Channel. Ch2
button to turn on or off. Press Mode button to exit. Use Use the Ch3 and Ch4 to select
original image preview or left and right turnover. This will mirror the input image left or
right.
6. System recovery:
Resets back to factory settings
7. Firmware version:
Operating software version
8. Back light adjustment :
Use the Ch3 and Ch4 to increase or decrease the back
lighting.
