Button Instructions
Menu Button:
Pressing this button once will open the menu. Pressing the menu button again while in the menu will
change to the second settings tab. Pressing the menu button while recording will activate the file
protection (A key will be present on the top of the screen if activated).
Up Button:
The up button is used while in the menu to move the highlighted area for selecting. The up button
can also be used to zoom in under the standby or shooting mode.
Down Button:
The down button is used while in the menu to move the highlighted area for selecting. The down
button can also be used to zoom out under the standby or shooting mode.
OK Button:
The OK is used to start recording in video mode. Pressing the button again in video mode will stop
the recording. In photo mode, the OK button is used to take a picture.
The OK button is also used to select a setting in the menu.
Mode Button (Mode Switch):
Press the mode button to switch between video mode, photo mode and the file browser interface. If
the Mode button is pressed during recording, it will disable or enable the MIC.
HDMI Port:
The HDMI port provides a HD output interface using the mini HDMI to HDMI cable provided that can
be plugged into a HDMI in supported device.
Micro SD Slot:
Where the Micro SD card is inserted (Max size is 32GB).
USB Interface:
The USB port can be used to charge the device or be connected to a computer for data
transmission.
Reset:
To hard reset the device in the case of a system jam or crash.
Power Key:
When the DVR is turned off, press it once to turn it on. While the system is on, hold down the power
button to turn it off.
AV Out:
Analogue Out that can be connected to a TV using a composite cable (Not included)
Power Indication Light:
When the device is turned on, a blue indicator will light up. When the device is recording the blue
indicator will flash blue. When the device is charging, the light will glow red.
Summary of Contents for HDDVR550
Page 1: ...USER GUIDE HDDVR550...
