background image

 Gato Audio FM-50

Page 8

Placing the speakers

Just like with real estate, location is the most important factor when setting up a high-end audio system. It is impossible to give you an 
exact instruction via this manual to set up your specifi c system perfectly in your listening room. However, we can off er you some thumb 
rules:

•  Place your speakers at least 0.5m from the rear and side walls. Placing 

a speaker close to the rear wall will provide an extension in level of 
bass and coloration in the midrange.

•  Basic setup should be an even-sided triangle with equal distance 

between each speaker as well as the listening position.

•  The FM-50 speakers are developed to play partially direct to the 

listening position. A good starting point for a setup is to angle them 
towards the end of your shoulders. If your listening room is very small 
and the speakers must be placed closely to the side walls, then more 
toe-in may be useful to get a more precise and clear image.

•  Hard surfaces like glass, stone and wooden fl oors create many 

refl ections which can make midrange reproduction sound harsh and 
with a blurry soundstage. These refl ections can be dampened with 
curtains and carpets.

•  Many soft surfaces, thick carpets and furniture may on the other 

hand provide too much dampening. This may cause the midrange 
reproduction to become “thin” and lacking in musical timing and 
energy. In such cases, it is advised to remove some of the dampening 
items.

In any case, time spent setting up your speakers is by far the most important adjustment parameter for your system. Room acoustics is a 
complex fi eld with an almost infi nite number of variables. Please note that while a setup might work well in your listening room, it may not 
be the perfect solution in other locations. 

For the best results, place the FM-50 on a solid fl oor. If the fl oor in covered with carpets we strongly recommend to use the spikes to 
penetrate the carpet and make direct mechanical connection to the fl oor underneath. Make sure that the speaker is resting equally on all 
four spikes by adjusting each spike individually so that the speaker is not able to make any movements or vibrations.

M

in. 50 cm

Min. 50 cm

Summary of Contents for FM-50













Reviews: