Instructions for GT1000DC
www.gatexpertstore.com
12
·
Fit limit switch stop onto the top of gear rack at the point where it meets the Spring/Magnetic
limit switch on the motor.
·
Tighten locking screws of limit switch stop.
Open Position
·
Position gate 150-200mm back from the gate stop open position. This will help in making sure
you do not slam the gate into the end stop/catch when setting the open position under power.
·
Fit limit switch stop onto the top of gear rack at the point where it meets the Spring/Magnetic
limit switch on the motor.
·
Tighten locking screws of limit switch stop.
Spring limit switch
Magnetic limit switch
Spring limit switch
