Instructions for GT1000DC
www.gatexpertstore.com
7
Figure 6
Step 3 - Removing / Installing Motor Cover
·
Unscrew the two cover screws located at each side of the motor cover.
·
Remove the rubber grommet below the limit switch (Figure 7).
Figure 7
Please Note: the rubber grommet must be fitted back onto the motor cover once the
cover has been re-fitted/replaced onto the base of the motor.
To make the motor into manual mode, insert the key
and open the manual release bar till it rotates by 90
°
.
In manual mode, the gear
can turn freely and the gate
can be operated by hand.
Turn 90
°
