Instructions for DKC500DCL/DKC800DCL
www.gatexpertstore.com
21
Remote Control Operation
Three button mode remote control: OPEN/CLOSE/STOP of motor are controlled by three
buttons separately on the remote control.
Single button mode remote control: OPEN/CLOSE/STOP of motor are controlled by one
button circularly on the remote control.
The forth button on remote control is Pedestrian Mode--press the forth button while the gate
is closed, the gate will open 1m wide to allow pedestrian access.
Three Button Mode Remote Control
Single Button Mode Remote Control
Figure 21
Remote Control Learning
Remove motor outer cover and continue to remove the transparent PCB cover, press the
button ‘K4’ on the control board, until the ‘LEARN’ indicator light turns on, then release the
button. While the light is on, press the button intended to be paired on the remote control
twice, the ‘LEARN’ indicator light will flash repeatedly and then turn off when remote control
is paired. A maximum 40 remote controls can be paired to one motor.
Clearing Remote Controls
To delete all paired remote controls, press and hold the button ‘K4’ till LEARN LED turns on.
When the LEARN LED turns off, all previously paired remote controls will be delete
Open
Close
Pedestrian
Mode
Stop
Open
Close
Stop
Pedestrian
Mode
