Instructions for DKC500DCL/DKC800DCL
www.gatexpertstore.com
6
Tools Required
·
Tape measure
·
Level
·
12mm concrete drill and hammer (when uses expansion screws)
·
Phillips head screwdriver
·
Straight screwdriver
Example Sliding Gate
Gate Track and Track Wheels
Gate End Catch
Gate Guide Rollers
Gate Stop
Figure 4
Please ensure that the gate opener power cable is not plugged in at any stage before Step 8.
Step 1 - Gate Preparation
·
Ensure that the sliding gate is correctly installed.
·
The gate is horizontal and level and the gate can glide back and forth smoothly when moved by
hand before installing the gate opener.
·
Wheels and guide rollers should rotate easily and be free from dirt or grime.
·
Track should be flat, level and firmly affixed.
·
Any misalignment in the gate will affect performance of the automatic gate opener.
The gate should slide smoothly by hand before attempting to install the gate opener.
Figure 5
