PY800AC/PY1400AC SLIDING GATE OPERATOR
12
1
2
3
4
Button 1
Button 2
Button 3
Button 4
Fig.12 Remote transmitter
�
Adding extra remote controls (Learn): Remove the cover, press the
learn button ‘AN1’ (Fig.8), then the ‘LED2’ (Fig.8) will be on and
turn off, then press the remote control button which you want to use,
the ‘LED2’ will turn on about 2 seconds and then turn off again. The
learning process is finished.
Up to 25 remote controls may be used.
�
Erase remote controls: To erase all existing remote controls, press
and hold learn button ‘AN1’, the ‘LED2’ turns on, release the button
once the ‘LED2’ turns off. This indicates that all the remote controls
have been erased completely.
�
Note
Note
Note
Note
: Press the ‘OPEN’ button of external button switch or remote
control button which has been learned, the gate will open, the motor
rotates clockwise, and the ‘LED2’ is turns on. The output voltage
between ‘D1 and D2’ (terminal X3) is AC220V/110V, the voltage
between ‘V’ and ‘U’ is AC220V/110V. Press ‘STOP’ button or the
same remote control button, the gate stops running. And the ‘LED2’ is
turns off. Then press ‘CLOSE’ button or the same remote control
button again, the gate will close, the motor rotates anticlockwise, and
the ‘LED2’ is turns on. The output voltage between ‘D1 and D2’
(terminal X3) is AC220V/110V; the voltage between ‘V’ and ‘W’ is
AC220V/110V. Press the ‘STOP’ button or the same remote control
