Gateway WGR-250, User Manual

Page: 11 / 124

5
Back
www.gateway.com
Back
Connector/component Description
Antenna Sends and receives signals from wireless Ethernet computers and
devices.
Reset switch Press and hold the reset switch for 10 seconds to return all
configuration settings to the default.
LAN ports Connect a computer, hub, or switch to these RJ-45 Ethernet ports.
WAN port Connect the DSL or cable modem to this RJ-45 Ethernet port.
-OR-
If you are adding this access point/router to an existing network that
has a router, connect the LAN port from the existing router to this
RJ-45 Ethernet port.
Power connection Plug the AC adapter into this connection. Use only the AC adapter
that came with the wireless access point/router. Use of any other
AC adapter may damage your access point/router and void the
warranty.
Antenna Antenna
Reset switch
WAN Port Power connection LAN Ports