Gateway PLU-300 User Manual Download Page 8

Page: 8 / 68

Chapter 1: Setting Up Your Powerline Adapter

www.gateway.com

Click

Install the software

. The InstallShield Wizard

starts.

- OR -

If you are installing the Gateway PLU-300 Ethernet
adapter and the wizard does not start automatically,
click

Start

Run

, type

d:\plu-300\setup.exe

in the

Run

box, then click

. The InstallShield Wizard starts.

- OR -

If you are installing the Gateway PLE-310 Ethernet
adapter and the wizard does not start automatically,
click

Start

Run

, type

d:\ple-310\setup.exe

in the

Run

box, then click

. The InstallShield Wizard starts.

Click

Next

, then follow the on-screen instructions.

During the installation:

■

If installing the software on Windows XP and a
message tells you that the driver has not passed
Windows Logo testing, click

Continue Anyway

. The

device driver files are copied to the hard drive.

■

If installing the software on Windows 2000 and a
a message tells you that no digital signature is
found, click

Yes

. The device driver files are copied

to the hard drive.

Summary of Contents for PLU-300





































































Search results

Summary of Contents for PLU-300

Reviews:

Related manuals for PLU-300

Brands by name

Popular brands

Gateway PLU-300, User Manual

Search results

Summary of Contents for PLU-300

Reviews:

Related manuals for PLU-300

Brands by name

Popular brands