4 Configuring Windows
4
On the
Basic
tab, type a network name in the
Network Name
field. For example,
network
.
This field is case-sensitive and must entered the
same for each computer.
5
Click
OK
to exit each dialog box. Perform the next
steps to verify your Client Manager configuration
settings.
6
Click the
icon in the lower-right corner on the
Task bar. The ORiNOCO Client Manager dialog box
opens.
7
Click
Actions
, point to
Select Configuration
Profile
, then click
Home
.
8
Click
OK
.
9
Remove the CD from the CD drive.
Configuring Windows
Important:
When installing the USB client on a
Windows 2000 computer, perform the configuration
procedures as shown in “Windows 2000 configuration”
on page 12.
The next series of configuration settings use the
Windows Network dialog box. This part of the set up
process is where you will substitute your specific
information in place of the example users: Pat and Chris.
To name the computer and network:
1
On the desktop, right-click
Network
Neighborhood
or
My Network Places
, then
select
Properties
. The Network dialog box opens.
2
Click the
Identification
tab. In the following
fields, enter:
■
Computer name
-
Pat
(Computer 1)
■
Computer name
-
Chris
(Computer 2)
This field identifies the computer to other users
on the network. Use a computer name of up to
15 characters with no blank spaces. Each
computer name must be unique on your network.
■
Workgroup
-
workgroup
(Computers 1 & 2)
Computer 1 & 2
Configure the second computer after
you set up the first computer.
