Gateway NX860, Hardware Reference Manual

Page: 37 / 66

Adding or replacing memory www.gateway.com
33
5
Disconnect all peripheral devices connected to the notebook and remove
any PC cards.
6
Turn your notebook over so the bottom is facing up, then remove the
battery. For more information, see
“Changing batteries” on page 27 .
7
Loosen the seven memory bay cover screws (these screws cannot be
removed).
8
Use the thumb notch to lift the memory bay cover, then remove it. Be
careful not to break off the tabs located on the end of the cover opposite
of the thumb notch.
Screws
Screws
Screws
Thumb notch