Gateway MX3311, Hardware Reference Manual

Page: 34 / 68

CHAPTER 2: Checking Out Your Gateway Notebook www.gateway.com
30
Changing batteries
Replacing the battery
Warning
Danger of explosion if battery is
incorrectly replaced.
Replace only with a battery specifically
manufactured for your Gateway
notebook. Discard used batteries
according to local hazardous material
regulations.
The battery used in this device may
present a fire or chemical burn hazard if
mishandled. Do not disassemble, heat
above 212°F (100°C), or incinerate.
Dispose of used battery promptly. Keep
away from children.
Caution
If your notebook is connected to AC
power, you can change the battery while
the notebook is turned on. If your
notebook is not plugged into an AC
outlet, you must turn the notebook off
while changing the battery or you will
lose any unsaved data.
To replace the battery:
1
If your notebook is on and is connected directly to AC power, go to Step 2 .
-OR-
If your notebook is on and is not plugged into an AC outlet, save your work
and turn off the notebook.
2
Close the LCD panel.
3
Turn your notebook over so the bottom is facing up.
4
Slide the battery lock to the unlocked position.
5
Slide the battery release latch.
6
Slide the battery out of the notebook.
7
Slide a battery into the notebook until it snaps into place.
8
Slide the battery lock to the locked position.
9
Turn your notebook over.
10
Open the LCD panel and press the power button.