Gateway MT6451 Service Manual Download Page 70

Page: 70 / 78

Replacing Notebook Components

Remove the four screws that secure the system board to the notebook.

Turn the system board over and disconnect the external video board cable from the old
system board and connect it to the new system board.

Install the new system board into the notebook, then replace the screws you removed in

Step 15

Replace the palm rest by following the instructions in

“Replacing the palm rest” on page 56

Replace the LCD panel assembly onto the notebook by following the instructions in

“Replacing the LCD panel assembly” on page 38

Replace the keyboard by following the instructions in

“Replacing the keyboard” on page 31

Replace the keyboard cover by following the instructions in

“Replacing the keyboard cover”

on page 29

Replace the hard drive kit by following the instructions in

“Replacing the hard drive” on

page 26

Replace the DVD drive by following the instructions in

“Replacing the DVD drive” on

page 11

Plug the antenna cables into the IEEE 802.11 wireless card, then replace the wireless bay
cover.

Screw

Summary of Contents for MT6451















































































Search results

Summary of Contents for MT6451

Reviews:

Related manuals for MT6451

Brands by name

Popular brands

Gateway MT6451, Service Manual

Search results

Summary of Contents for MT6451

Reviews:

Related manuals for MT6451

Brands by name

Popular brands