Gateway MT6451, Service Manual

Page: 54 / 78

Replacing Notebook Components
50
12
Unplug both cables from the LCD panel inverter on the old panel, then transfer the inverter
to the new panel. Plug both cables into the inverter.
13
Place the new LCD panel into the existing LCD panel assembly lid.
14
Replace the four screws removed in Step 10 .
15
Replace the bracket and the two screws removed in Step 9 .
16
Press the front and back of the LCD panel together in several places until they click in place.
You should find no loose spots or spots where the two halves do not meet.
17
Replace the four or six LCD panel assembly screws.
18
Replace the four or six rubber inserts.
19
Replace the LCD panel assembly onto the notebook by following the instructions in
“Replacing the LCD panel assembly” on page 38 .
20
Close the keyboard compartment by following the instructions in “Replacing the keyboard”
on page 31 .
21
Replace the keyboard cover by following the instructions in “Replacing the keyboard cover”
on page 29 .
22
Plug the antenna cables into the IEEE 802.11 wireless card, then replace the wireless bay
cover.
Important
The inverter may be either at the side of the LCD panel or at the bottom.