8
Now that you’re familiar with the Media Center
components, connect them to your Media Center
computer.
2
Insert two AA batteries into the remote. Make sure
to match the + and - on the batteries with the
+ and - symbols inside the battery compartment.
Setting up Media Center hardware
3
Connect the remote sensor to a USB port on
your computer. Then position the sensor so there
is a direct, unobstructed line-of-sight between the
remote and the remote sensor. The remote has a
range of 10 feet.
4
Locate the IR sensor on the set-top box by shining
a flashlight through the IR sensor window. Look for
a 1/2 to 3/8 inch metallic rectangle with a 1/8 inch
dark circle in the middle. This is the IR sensor.
1
Before setting up the Media Center hardware,
make sure that you’ve set up your computer
according to the instructions on the
Set Up Your
Gateway Computer
poster.