Gateway M675, Service Manual

Page: 23 / 69

18
www.gateway.com
Replacing the keyboard
Tools you need to complete this task:
Screws removed during this task:
To replace the keyboard:
1
Follow the instructions under “Preventing static electricity discharge” on page 5 .
2
Disconnect the AC adapter and modem and network cables, then prepare the
notebook by following the instructions in
“Preparing the notebook” on page 6 .
3
Turn the notebook over so the bottom is facing up.
4
Remove the battery by following the instructions in “Removing the battery” on
page 7 .
5
Turn the notebook over so the top is facing up.
6
Open the LCD panel to the fully open position.
7
Remove the keyboard cover by following the instructions in “Replacing the keyboard
cover” on page 16 .
Caution Be careful not to use too much force when opening the LCD panel.
Phillips #0 screwdriver
Flat-blade driver
5 chrome 2.5 × 2.5 mm
(keyboard)