Gateway M-7301U Reference Manual Download

Page: 92 / 164

CHAPTER

: Maintaining Your Notebook

Recovering pre-installed software and drivers using
Gateway Recovery Center

To recover specific drivers and software:

Click (

Start

All Programs

Gateway Recovery

Center

, then click

Gateway Recovery Center

. The

Gateway Recovery Center

opens.

To recover software that was pre-installed, click

Programs

, then click

Application recovery

- OR -

To recover device drivers that were pre-installed, click

Hardware

, then click

Device driver recovery

Important

If you have recently reinstalled Windows or installed a new hard

drive, and your Start menu does not contain Gateway Recovery Center
as an option, you must recover your software and drivers using
software and driver recovery discs you have created. For instructions,
see

“Recovering pre-installed software and drivers using recovery discs”

on page 85

Summary of Contents for M-7301U





































































































































































Search results

Summary of Contents for M-7301U

Reviews:

Related manuals for M-7301U

Brands by name

Popular brands

Gateway M-7301U, Reference Manual

Search results

Summary of Contents for M-7301U

Reviews:

Related manuals for M-7301U

Brands by name

Popular brands