manualshive.com logo in svg

Gateway LN-520, Operating Instructions Manual

Share
Download
Gateway LN-520 Operating Instructions Manual Download Page 60

www.gateway.com

59

WARRANTY BOOKLET

For Residents of Canada:

1.  This Agreement is subject to the applicable provisions of Canadian consumer protection laws that cannot be

derogated from by private agreement.

2.  Shipping and Title You must comply with all applicable export laws and regulations of Canada, the United States

and other relevant countries if you export the Product outside Canada.

3.  Return Policy. Gateway does not accept for return any products purchased from a reseller. To return products to

Gateway, contact Gateway Canada Tech Support and follow the instructions you receive. In all cases, Gateway will
not be responsible for any shipping and handling charges to and from Gateway, or paying or refunding customs fees
or taxes that may be due.

4. Language. You confirm your request that this Agreement and all documents related directly or indirectly thereto be

drafted in the English language. Vous reconnaissez avoir requis que la présente convention ainsi que tous les
documents qui s’y rattachent directement ou indirectenent soient rédigés langue anglaise.

For Residents of Mexico:

1.  Shipping and Title. You must comply with all applicable export laws and regulations of Mexico, the United States

and other relevant countries if you export the Product outside Mexico.

2.  Return Policy. Gateway does not accept for return any products purchased from a reseller. To return products to

Gateway, contact Gateway Mexico Tech Support and follow the instructions you receive. To return a product
purchased directly from Gateway in the United States, contact Gateway International Support in the United States
and follow the instructions you receive. In all cases, Gateway will not be responsible for any shipping and handling
charges to and from Gateway, or paying or refunding customs fees, taxes, or VAT that may be due.

For All International Customers:

The standard warranty stated above also applies to Gateway® products shipped to a country outside the United States,
provided that customers outside the United States and Canada are responsible for paying all freight charges incurred in
shipping, importing/exporting and receiving replacement products and parts and for arranging and paying for the
shipment of any defective part(s) back to the Gateway. All international customers are responsible for all customs duties,
VAT and other associated taxes and charges.

Summary of Contents for LN-520































































Reviews:

No comments

Brands by name

Popular brands

Load more brands