background image

CHAPTER 3: Maintenance Basics

www.gateway.com

20

5

Slide the drive release latch back to unlock the drive, then slide the drive 
forward and out of the drive bay.

6

Slide the new drive into the drive bay.

7

Slide the drive release latch forward to lock the drive into place. You do 
not need to replace the thumbscrew because it was originally installed for 
shipping purposes.

8

Reconnect the drive cables using your notes from 

Step 3

. If you are 

installing a new drive, follow the manufacturer’s instructions.

9

Replace the front bezel by following the instructions in 

“Replacing the 

front bezel” on page 14

.

10

Replace the side panel by following the instructions in 

“Replacing the side 

panel” on page 15

.

Adding or replacing the memory card reader

To replace the memory card reader:

 

1

Remove the side panel by following the instructions in 

“Removing the side 

panel” on page 12

.

2

Remove the front bezel by following the instructions in 

“Removing the 

front bezel” on page 14

.

3

If you are adding a memory card reader, go to 

Step 7

.

- OR - 

If you are replacing a memory card reader, proceed to the next step.

4

Disconnect the memory card reader cables, noting their locations and 
orientation. (You will reconnect the cables after you install the new 
memory card reader.)

Summary of Contents for GT5042j

















































Reviews: