Gateway E-6100 User Manual Download Page 103

Page: 103 / 188

Adding or replacing a diskette, CD, or DVD drive

www.gateway.com

Adding or replacing a diskette, CD,
or DVD drive

Use these instructions to replace 5.25-inch drives such as CD or DVD drives,
and 3.5-inch drives, such as diskette drives.

To add or replace a CD, DVD, or diskette drive:

Open the case using the instructions in

“Opening the case” on page 92

If you are adding a drive, locate an empty drive bay.

-OR-

If you are replacing a drive, disconnect the drive cables, noting their
locations and orientation. (You will reconnect the cables after you install
the new drive.) See the drive documentation for further instructions.

Data ribbon cable

Power cable

Summary of Contents for E-6100





























































































































































































Search results

Summary of Contents for E-6100

Reviews:

Related manuals for E-6100

Brands by name

Popular brands

Gateway E-6100, User Manual

Search results

Summary of Contents for E-6100

Reviews:

Related manuals for E-6100

Brands by name

Popular brands