Gateway E-6100 User Manual Download Page 98

Page: 98 / 188

Chapter 7: Upgrading Your Computer

www.gateway.com

Opening the case

To open the computer case:

Follow the instructions under

“Preventing static electricity discharge” on

page 91

Shut down your computer, then disconnect the power cord and modem,
network, and all peripheral device cables.

Press the power button to drain any residual power from your computer.

If the case cover has a shipping screw installed on the back of the case,
remove the screw. For information about the location of the screw, see

“Back” on page 4

Warning

To avoid exposure to dangerous electrical voltages and
moving parts, turn off your computer, then unplug the
power cord and modem cable before opening the case.

Summary of Contents for E-6100





























































































































































































Search results

Summary of Contents for E-6100

Reviews:

Related manuals for E-6100

Brands by name

Popular brands

Gateway E-6100, User Manual

Search results

Summary of Contents for E-6100

Reviews:

Related manuals for E-6100

Brands by name

Popular brands