59
www.gateway.com
Replacing the system battery
7
Locate the old battery on the system board and note its orientation. You will need
to install the new battery the same way.
8
Push the battery release tab. The battery pops out of the socket.
9
Make sure that the positive (+) side of the new battery is facing up, then press the
battery into the socket until it snaps into place.
10
Replace the side panel by following the instructions in
.
11
Reconnect all external cables and the power cord.
12
Turn on your computer.
13
Open the BIOS Setup utility.
14
In the BIOS Setup utility, restore any settings that you wrote down in
.
15
Save all your settings and exit the BIOS Setup utility.
Battery release tab
8510808.book Page 59 Thursday, June 30, 2005 7:43 AM
