www.gateway.com
5
13
Replace the memory bay cover, then tighten the cover
screws.
14
Insert the battery, then turn your notebook over.
15
Connect the power adapter, modem cable, and network
cable, then turn on your notebook.
16
Reconnect all peripheral devices and replace any
PC cards.
Removing the weight saver
To remove the weight saver:
1
Follow the guidelines under “Preventing static
electricity discharge.”
2
Turn off your notebook.
3
Disconnect the AC adapter, modem cable, and network
cable.
4
Disconnect all peripheral devices and remove any
PC cards.
5
Turn your notebook over so the bottom is facing up,
then remove the battery. For more information, see
“Changing Batteries” in your
Reference Guide
.
6
Slide the release latch to the right, then pull the weight
saver out of the drive bay.
Tools
You need a small Phillips screwdriver to install the DVD drive.
