Gateway 960, Installation Manual

Page: 26 / 36

22
Installing Your Gateway Server into a Rackmount Cabinet
www.gateway.com
3
Push the server evenly into the cabinet until it is pushed completely into
the cabinet. If the rails lock when you push the server in, slide the white
release latches toward the front of the server and push again.
Tips & Tricks The server should move smoothly, without binding, after
the first installation.
If the server does not slide smoothly, make sure that all
rails and brackets are aligned correctly.
If the server jams, slide the white release latch toward the
front of the server and pull the server to the fully extended
position, then push it closed again.
Tips & Tricks When you press the white release latches, you may have
to slide the server out slightly before pushing it back into
the locked position.
Release latch