Gateway 9210, User Manual

Page: 86 / 106

81 www.gateway.com
System board specifications
Processor mPGA478 package
800/533/400 MHz system bus
Supports either 1 Intel Pentium 4 or 1 Intel Celeron CPU
Chipset
Intel 827210
■
Intel 827210 Memory Controller Hub (MCH) (Northbridge)
■
Intel 6300ESB I/O controller (Southbridge)
■
Intel 82802AC 8 Megabit Firmware Hub (FWH)
Memory
■
Four 184-pin DDR SDRAM Dual Inline Memory Module (DIMM) slots
support as much as 4 GB unbuffered ECC system memory
■
Support for single-sided or double-sided DIMMs (DDR266/333/400)
■
To run DDR400 memory at full speed use an Intel Pentium 4
processor with 800 MHz system bus frequency.
■
To run DDR333 memory at full speed use an Intel Pentium 4
processor with 533 MHz system bus frequency. Note: DDR333
memory will run at 320 MHz frequency when you use an Intel
Pentium 4 processor with system bus frequency of 800 MHz.
■
To run DDR266 memory use with an Intel Pentium 4 processor with
400 MHz or 533 MHz system bus frequency only.
PCI
devices/slots
Three PCI-X 64-bit PCI slots
One 32-bit PCI slot
VGA On-board ATI Rage XL
■
8 MB SDRAM
■
1600 × 1200 (2D) max
■
1024 × 768 (3D) max
LAN
■
One Intel 82547EI Platform LAN Connect (PLC) device for
10/100/1000 Mbps Ethernet LAN connectivity
■
One Intel 82551QM device for 10/100 Mbps Ethernet LAN
connectivity
SCSI
■
Optional add-in Ultra 320 SCSI controller card through the PCI slot.
ACPI
ACPI compliance
Supports:
■
S0
■
S1
■
S4
■
S5