manualshive.com logo in svg

Gateway 7001 Series, User Manual

The Gateway 7001 Series user manual is an essential guide for maximizing the full potential of your device. With easy-to-follow instructions, detailed diagrams, and troubleshooting tips, this manual ensures a seamless user experience. Download it for free from our website manualshive.com to unlock the full potential of your Gateway 7001 Series.

Share
Download
background image

32

www.gateway.com

Providing administrator password and 
wireless network name

Caution

The Gateway 7001 Series self-managed AP is not designed for 
multiple, simultaneous configuration changes. If you have a network 
that includes multiple access points, and more than one administrator 
is logged on to the Administration Web pages and making changes 
to the configuration, all access points in the cluster will stay in synch 
but there is no guarantee that all configuration changes specified by 
multiple users will be applied.

Field

Action

Administrator 
Password

Type a new administrator password. The characters you 
enter will be displayed as “*” characters to prevent others 
from seeing your password as you type.

The Administrator password must be an alphanumeric 
strings of up to 32 characters. Do not use special 
characters.

Note:

 As an immediate first step in securing your 

wireless network, we recommend that you change the 
administrator password from the default.

Administrator 
Password (again)

Re-type the new administrator password to confirm that 
you typed it as intended.

Summary of Contents for 7001 Series



























































































































































































































Reviews:

No comments

Related manuals for 7001 Series

Lanpro LP-1521 Manual preview
LP-1521
Brand: Lanpro Pages: 3
H3C MSR900-E Routers Installation, Quick Start preview
MSR900-E Routers
Brand: H3C Pages: 2
S&C SpeedNet SDR Series Instruction Sheet preview
SpeedNet SDR Series
Brand: S&C Pages: 16
3Com 3CRWE955275 Datasheet preview
3CRWE955275
Brand: 3Com Pages: 8
Linksys MAX-STREAM EA7250 User Manual preview
MAX-STREAM EA7250
Brand: Linksys Pages: 20
Cisco AIR-CAP3501E-A-K9 Getting Started Manual preview
AIR-CAP3501E-A-K9
Brand: Cisco Pages: 34
Cisco AIR-AP1210 - Aironet 1200 - Wireless Access Point External User Manual preview
AIR-AP1210 - Aironet 1200 - Wireless Access Point External
Brand: Cisco Pages: 35
Cisco Aironet 1520 Series Hardware Installation Manual preview
Aironet 1520 Series
Brand: Cisco Pages: 66
Cisco 1830 Series Getting Started Manual preview
1830 Series
Brand: Cisco Pages: 44
Cisco AIR-CAP1552H-x-K9 Installation Manual preview
AIR-CAP1552H-x-K9
Brand: Cisco Pages: 24
Cisco AIR-AP1542D-*-K9 Installation Manual preview
AIR-AP1542D-*-K9
Brand: Cisco Pages: 72
Cisco AIR-AP1010 - 1000 Series Lightweight Access Point Quick Start Manual preview
AIR-AP1010 - 1000 Series Lightweight Access Point
Brand: Cisco Pages: 36
Cisco AIR-BR1310G-A-K9 - Aironet 1310 Outdoor Access Point/Bridge Datasheet preview
AIR-BR1310G-A-K9 - Aironet 1310 Outdoor Access Point/Bridge
Brand: Cisco Pages: 14
Cisco AIR-AP1232AG-A-K9 - Aironet 1230AG - Wireless Access Point Datasheet preview
AIR-AP1232AG-A-K9 - Aironet 1230AG - Wireless Access Point
Brand: Cisco Pages: 8
Cisco 1231G - Aironet - Wireless Access Point Hardware Installation Manual preview
1231G - Aironet - Wireless Access Point
Brand: Cisco Pages: 126
Cisco AIR-AP1251AG-A-k9 Hardware Installation Manual preview
AIR-AP1251AG-A-k9
Brand: Cisco Pages: 140
Cisco AIR-AP1210 - Aironet 1200 - Wireless Access Point External Hardware Installation Manual preview
AIR-AP1210 - Aironet 1200 - Wireless Access Point External
Brand: Cisco Pages: 160
Cisco 7330 Quick Start Manual preview
7330
Brand: Cisco Pages: 28

Brands by name

Popular brands

Load more brands