Gateway 600, Service Manual, Page: 99 / 103

94
Replacing Gateway 600YG2 Components
www.gateway.com
30
Install the processor onto the new system board making sure that Pin 1
on the processor (indicated by the silk-screened arrow on the corner of the
processor) aligns with Pin 1 on the processor socket (indicated by the
absence of a pin hole in the processor socket), then lock the processor in
place by using a flat-blade screwdriver to turn the processor lock screw
¼-turn clockwise.
31
Place the new system board onto the notebook.
32
Slide the battery cover door closed.
33
Reinstall the audio board by following the instructions in “Replacing the
audio board” on page 65 .
Pin 1
Pin 1