Gateway 600, Service Manual, Page: 69 / 103

64
Replacing Gateway 600YG2 Components
www.gateway.com
14
Use a flat-blade screwdriver or non-marring tool to carefully pry open the
metal tabs that secure the wires for the right speaker, then completely
remove both speakers.
15
Lay the new left speaker near the audio board and align the new right
speaker over its screw holes on the notebook. The left speaker is the speaker
with the shortest wires.
16
Plug in the connector for each speaker. The left speaker should be attached
to the connector furthest from you.
17
Carefully thread the wires for the right speaker under the metal tabs, then
press the tabs back down to secure the wires.
18
Replace the eight screws that secure the speakers to the notebook.
19
Reassemble the notebook.
Caution Legal requirements dictate that a security screw (or other
means) be used to attach the mini-PCI cover to the chassis
in a manner that restricts end user access. End users are
strictly prohibited from having access to the wireless card.
Due to manufacturing process changes, Gateway 600YG2
notebooks manufactured after August 7, 2003 require a
Torx head security screw to attach the mini-PCI cover.
Caution Legal requirements dictate the mini-PCI cover be in place
during any and all operation of the notebook’s wireless
feature.