Gateway 200, User Manual, Page: 161 / 314

151
Changing batteries
www.gateway.com
Changing batteries
If your notebook is plugged into an AC outlet, you can change the battery while
your notebook is turned on. If your notebook is not plugged into an AC outlet
you must turn your notebook off while changing the batteries.
To replace the battery:
1
If your notebook is on and is plugged into an AC outlet, go to Step 2.
-OR-
If your notebook is on and is not plugged into an AC outlet, save your
work and turn off your notebook.
2
Close the LCD panel, undock your notebook if it is docked, and turn your
notebook over.
3
Slide the locking battery latch to the unlock position.
Warning Danger of explosion if battery is incorrectly replaced.
Replace only with a Gateway 200STM battery. Discard
used batteries according to the manufacturer’s
instructions.
The battery used in this device may present a fire or
chemical burn hazard if mishandled. Do not disassemble,
heat above 212°F (100°C), or incinerate. Dispose of used
battery promptly. Keep away from children.