![background image](http://html1.mh-extra.com/html/gates/pro-action/pro-action_setup-use-and-care-manual_3759102010.webp)
Setup
Page 10
Test the Lens Release Mechanism.
Move the release button to the position
shown and press.
You should see two pins on the Nikonos RS Mount flange retract. BE SURE the
pins retract below the level of the flange. This is required for full disengagement of
the lens.
CAUTION: FAILURE TO CHECK THE RELEASE MECHANISM FOR PROPER
OPERATION CAN RESULT IN A LENS THAT WILL NOT UNMOUNT FROM THE
HOUSING.
Verify again that the release mechanism is working reliably.
Park the Release Control
in the position shown when not in use.
STEP 1
. Align the release
mechanism as shown and
press.
STEP 2
. Visually verify
these two pins retract fully
below the flange face.