Gates PLA80, Setup, Use And Care Manual, Page: 5 / 24

Introducing the PLA80 Page 5
Unpacking the PLA80
After you remove the PLA80 from its shipping container, carefully inspect it for
missing parts or damage that may have occurred during shipment. If any
discrepancies are discovered, please contact your Gates dealer immediately for
assistance.
Standard Configuration
The PLA80 comes with the following standard items:
o
PLA80 system including:

Adapter cone base

Half retaining rings x 4

Threaded external locking collar

Internal bayonet locking collar
o
Spare o-rings

Adapter cone o-ring

Barrel Seal o-ring

Internal locking collar o-ring
o
Flex gear ring adapter x 2
o
O-ring removal tool
o
Spare half retaining rings x 2
Additional kit items:
In addition to the standard items, PLA80 kits also come with the following items
depending on whether the small or large LGD kit was ordered.
The large kit is configured for housings such as the Deep Weapon that require a
guide bar for their lens gear drives.
The large kit contains the following additional items:
o
Guide Bar 4.5”
o
Guide Bar 6.0”
o
Acetyl Drive Shaft 4.0”
o
Acetyl Drive Shaft 6.0”