
PLA80 Assembly
Page 15
Step 6: Prepare Half Rings and PLA80 Adapter Cone
Locate 2 half ring sections and place them in an easily accessible place near the front of
the housing.
Lubricate the o-ring on the PLA80 port adapter cone.
Position the adapter cone over and past the lens
’ opening and onto the barrel.
Note: do not secure the adapter cone onto the port ring yet.
Support the adapter cone with one hand while completing the next steps.
Leave a gap
Lubricate
O-ring
Support Bottom of
PLA80 Adapter
Cone
Locate 2 x Half Rings