Gates Underwater Products
•
5111 Santa Fe Street, Suite H • San Diego, CA • 92109
858.272.2501 • 800.875.1052 • Fax 858.272.1208 • [email protected] • www.GatesHousings.com
4
1/6/2004
Side mount
Swivel
Top mount
Monitor bracket spans handles
Spacer(s) may be required
between handle and bracket
Swivel
base and
yoke.
Mounting to a Housing
Attachment of the EM253 to any housing is straightforward and generally the same
(with exception of the Gates XL1/XL1s housing). See photos below for typical
installations.
ü
TRV / VX / PD / HD housings
utilize
a
bracket that secures to the handles and
spans the top of housing. In the center
of the bracket the EM253 swivel base will
attach.
After mating the swivel base and yoke,
tighten the wing nut until the EM253
moves in all directions with enough
resistance to stay in the position you
desire, yet remain moveable for re-
positioning
ü
XL1/XL1s housing.
An “L” shaped bracket is attached to the left side of
the
housing on a threaded stud located directly above the left handle.
Note that the monitor can be mounted in two ways: offset to the side, and directly
on top of the housing (see photo). Determine your preferred mounting method and
attach the “L” bracket to the housing appropriately using the ¼-20 nylock nut and
stainless washer. You may have to move the swivel base on the “L” bracket for the
different positioning.