DEEP EPIC Setup
Page 9
Shell removal.
Before releasing the 3 latches on the shell, retract the Zoom, Iris
and Power control on the right side, and the Assignable control on the left (see the
controls section for additional details).
Release the latches by depressing the lock and pulling up on the latch. Once
released the shell will slide to the rear on the foot rails until free.
Step 2. Release 3
latches by pressing
on the release tab
and lifting up.
Step1. Pull out the
Zoom, Iris and
Power control on the
right side.
Pull out the Assign
control on the left
side.
Step 3. Slide the
shell back until free
from the housing.
Note: If you are opening the shell after a dive,
secure the monitor to the top of the front shell or
set off to the side of the housing.
Note: DEEP RED shown
