The AX700 Setup
Page 12
Installing the Camera into the Housing
Pull out
Focus, Custom, and LCD pivot controls.
The Focus and Custom control
need only be retracted ~ 1in / 2.5cm. The LCD Pivot should be gently retracted until
it stops.
Carefully slide camera
onto dovetail until it stops.
Secure the camera
by rotating the cam lock clockwise.
Open the LCD fully
as shown in the image on page 14.
Rotate and Guide the LCD Pivot
o
nto your camera’s LCD display as shown on
page 14.
Press in
the
Focus and Custom controls.
Check controls.
Before closing the housing, it is a good idea to check all of the
controls on the front shell for proper operation. (See section 4 for controls mentioned
here.)
Retract the Focus,
Custom and LCD
Pivot Controls.
