12
Loop recording function
G-Sensor function
This feature allows you to set the size of the files your
Dash Cam will record before saving and creating a new
file. It allows the Dash Cam to record over the oldest
recorded files once the card is full. This can be turned
OFF, or record 1, 2, 3, 5 or 10 minute video files. If you
want to keep any of the files it is best to upload them to
your computer. We recommend the Dash Cam to be set
to ‘3’ minute files.
Note: With this function turned off it may fill up the
SD card as no files will be overridden. Once the
card is full the Dash Cam will stop recording.
This function activates in the case of a car accident by
determining the gravitational acceleration (1g = 9.8
meters/second^2). When this function activates the
Dash Cam will automatically sync a 10 second video
clip and save it to the Event folder on the SD card. We
recommend Low Sensitivity to avoid false triggers.
Note: With this function turned on it may fill up the
SD card with locked video files. Re-format the SD
card to create space. The device does NOT
guarantee video recording of all accidents as
built-in impact sensor may not be activated due to
combination of user settings and the level of impact
during the collision.
