background image

20

21

》 To Release Safe Handle Setting

1⃞

Open the battery cover and 
take out a hex wrench. 

2⃞

Keep pressing the Safe Handle button. 

Turn the set bolt found in next to 
the handle to Close side.

》 To Set Safe Handle 

1⃞

Open the battery cover and 
take out a hex wrench. 

2⃞

Turn the set bolt found in next to the 

handle to Open side until the Safe Handle
button comes out.

Volume Setting Feature

It enables you adjust the volume of various sounds from the product. 

》 Volume Setting

To set volume switch 

Order

Play

Description 

The operation sound volumes are adjusted according
to the Volume Switch Setting. 
(2 : Louder / 1: Lower / 0 : Mute )

Settings 

Safe Handle Feature

The technology to prevent a forced attempt to drill a hole in the door and unlock the Doorlock has been applied. 

Auto Lock setting locks a door within 5 seconds after the door was closed. 

The default setting is Normal Mode. 

Settings 

Change to Fingerprint Mode

Press number 1 and 1 button

Enter the Master Number

》 Fingerprint Mode Setting 

Order

Play

Description 

Press 

(Registration) button

again to set

Security Mode or Normal Mode. 

Press the number 1 and then, 1 again on the keypad. 
Enter the registered Master Number. 

Press number 1 and 3 button

Enter the Master Number

Press the number 1 and then, 3 again on the keypad. Enter
the registered Master Number. 

1⃞

Press

(Registration)

button and    button 

Open the battery cover in the back body. 
Press 

(Registration) button and then, [#] button. 

》 To Set Auto/Manual Feature

Auto Lock Setting

Manual Lock Setting

Order

Play

Description 

Press the interior Auto/Manual Setting button to keep
the button up. 

Press the interior Auto/Manual Setting button
to keep the button down. 

Auto / Manual Feature

Security Mode Setting

Normal Mode Setting 

Directions 

Be careful that the set bolt won’t detach when modifying the Safe Handle Setting. 

Even when the operation sound is set as ‘Mute,’the error and alarm sounds will go off. 

Note

Even after a door was locked by the Auto Lock function, please check again if the door was completely locked. 

It is advised to keep the fingerprint exclusive number(4 digits) as a separate list just in case for a separate 

fingerprint deletion at Security Mode. 

If more than 1 fingerprint is registered after the Security Mode is set, you may not open a door with a password. 

(If the fingerprint module is broken, you may use a password.)

Note

2⃞

Press     

(Registration)

button 

Summary of Contents for YDM4109

















Reviews: