Gate Aster BASIC, Quick Start Manual, Page: 29 / 60

28
Notice
To run programming via trigger and fire selector, your
AEG must have a physical 3-stage fire selector.
Turning on the programming mode*
1. Switch fire selector position to SEMI
2. Fire a shot or burst
3. Keep the trigger pulled for 7 seconds
– until you hear a vibration and see
dark blue light in the trigger hole
* Not possible if Auto mode is assigned to SEMI position.
SEMI POSITION
FUNCTION WITH CORRESPONDING NUMBER OF VIBRATIONS AND LED COLOR
1 2 3 4 5
Fire mode Burst mode
Battery
protection
Active
brake
Advanced*
AUTO POSITION
OPTION WITH CORRESPONDING NUMBER OF VIBRATIONS AND LED COLOR
1 2 3 4 5 1 2 3 4 5 1 2 3 4 1 2 3 1 2 3 4
SAFE-SEMI-AUTO
SAFE-BINAR
Y-AUTO
SAFE-SEMI-SEMI
SAFE-SEMI-BURST
GCS se
tting**
3 x Full
3 x Int
errup
tible
5 x Full
5 x Int
errup
tible
GCS se
tting**
Off
LiPo
LiPo 3.2 V w
arning
GCS se
tting**
Aut
o
Off
GCS se
tting**
DTC
Clear DTC
Res
tor
e def
ault se
ttings
Res
tor
e f
act
ory se
ttings
* To evoke options of Advanced function, hold the trigger down for more than 3 seconds.
** GCS setting is a setting previously defi ned in GCS application, whose value is not available for selection
in this programming mode. Once you change such setting to a diff erent option during programming via
trigger and then exit this programming mode, it is no longer possible to set that setting from this level
(it can be still specifi ed via GCS).