background image

7

air intake.

When you have to clean the air intake?

Deposits on the injector tips may ruin an injector spray pattern which in turn causes fuel       

problems and uneven engine running. This can then lead to an injector dosing and distri-        

bution mechanism no longer working effectively. By removing contamination on each injector 

this ensures a proper supply and distribution of fuel and avoids ongoing problems. This also 

prevents that the unburned fuel creating more engine deposits. By keeping the valves clean 

this will also offer better compression, engine operation and fuel economy.

Better combustion means better utilization of fuel and less pollution. In addition to the im- 

proved combustion it is achieved by the features that we have gone through previously with 

GAT Petrol Cleaner PLUS.

GAT Petrol Cleaner PLUS improves combustion by reducing the chemical reactions in the fuel, 

before it is ignited by the spark from the spark plugs. This ensures proper combustion at the 

right moment. Now triggered energy, when the spark ignites the fuel-air mixture, and not 

before! It provides higher temperature and pressure in the combustion chamber and thus 

more energy is transferred. When the pressure and temperature rise is also achieved bet

-

ter combustion of the fuel, thereby reducing the amount of carbon monoxide and unburned        

residues in the exhaust.

When using air inlet cleaning GAT „Air Intake Cleaner“ petrol (part no 62022) or „Air Intake 

Cleaner“ diesel (ref 62034) must be prepared to strangle 

all air-introduction

 into the engine 

if it would run on.

Check that there are no faults with the to the air intake that allows the engine to continue to 

run even though you blocked the intake otherwise there could be damage to the engine if the 

engine over speed.

Always ensure that you can choke all air supply and the engine will stop immediately.

If the engine runs on all hoses must be drained of fluid that may have accumulated before the 

engine is started again.

Afterwards  let  it  stand  for  a  few  hours  with  disconnected  hoses  so  that  the  vapors  can             

evaporate.

 Intake Cleaning - Precaution.

Summary of Contents for Stream









Reviews: