Important Safeguards for all Electrical Appliances
• Ensure that the voltage rating of your mains power supply corresponds to the voltage requi-
rements of the appliance (220/240 V, 50 Hz, AC). Always connect the appliance directly
to a mains power supply wall socket with protective conductor (earth/ground) connected
properly. The installation of a residual current safety switch with a maximum rated residual
operating current of 30 mA in the supplying electrical circuit is recommended. If in doubt,
contact your local electrician for further information.
Do not use any multiple desk socket.
• Do not leave the appliance unattended while connected to the power supply.
Always
switch OFF the appliance and IMMEDIATELY unplug the appliance after ope-
ration and if it is not in use and before laying it down, cleaning and/or
assembling or disassembling the processing tools.
Always grasp the plug to
disconnect the appliance from the power outlet.
• Always handle the power cord with care. Do not pull or strain the power cord. The power
cord may never be knotted or squeezed. Do not let the power cord hang over the edge of
the table or counter. Take care not to entangle in the power cord.
• Do not touch the appliance with wet hands to avoid risk of electric shock. Do not touch
the appliance, when it is damp or wet and connected to the mains power supply. In this
case, immediately unplug the appliance to avoid risk of electric shock and damage.
Moving Parts – Risks of Injuries to Persons
• Do not touch the processing tools (whisks and dough hooks) with your hands or any other
objects (hair, clothes, brushes, cooking utensils), when the appliance is connected to the
power supply. Always switch OFF the appliance, unplug the appliance and wait for the
motor to stop, before laying down the appliance or assembling/disassembling or cleaning
the appliance.
•
Always IMMEDIATELY unplug the appliance after each operation.
• Always handle the whole appliance with care and without violence to avoid injuries to
persons and damage.
• Always immerse the processing tools in the food, before switching on the appliance, to
avoid excessive splashing. Always keep at least 5 cm (ca. 3 finger’s breadth) of free space
between the food and the bottom of the motor housing.
10
40980_Manuel.qxd 08.03.2005 9:14 Uhr Seite 18
