10
11
TECHNICAL SPECIFICATIONS
Model:
Art.-No.: 62397 Design Toaster Pro 2S
Power supply:
220-240 V AC, 50/60 Hz
Power consumption:
950 W
Length of power cord:
100 cm
Weight:
ca. 1,6 kg
Dimensions:
approx. 24.0 cm x 17.5 cm x 18.5 cm
(width x depth x height)
Size of bread slots:
13.5 cm x 3.2 cm
Certification:
DDEEKKRRAA
PROPERTIES OF YOUR NEW DESIGN TOASTER PRO 2S
After toasting, the appliance will switch off and eject the bread slices automatically.
For taking out the bread slices conveniently you may pull the toasting lever upwards
somewhat above the idle position to lift the bread slices out of the bread slots.
Via the removable crumb tray you can take out crumbs easily that have been fallen
into the appliance during toasting.
LED DISPLAY
The Design Toaster Pro 2S is equipped with an LED display, indicating the selected
browning level (1 to 9) and the progress of the toasting process via 9 LEDs. During
the toasting process, the LEDs are counting down the browning time by going out
one after the other. With all LEDs dark, the toasting process is complete.
In DEFROST mode, the currently lit LEDs will be flashing and counting down the
browning time as well.
With the REHEAT button pressed, several times all 9 LEDs will be illuminated one
after the other and go out.
MEMORY FUNCTION
Whenever you connect the appliance to the power supply, the appliance starts
with the default browning level 5. However, after changing this setting, your recent
choice will be kept in memory as long as the appliance is connected to the power
supply. The appliance will start the next toasting process using this individual set-
ting. You may change this setting to your liking via the browning dial and/or the
DEFROST or REHEAT button.
Note:
Your setting will be deleted from memory with any interruption of the power supply
or if you had pressed the CANCEL button during a toasting process. Thereafter,
the appliance will start again with the default browning level 5.
BEFORE FIRST USE
WARNING: DO NOT
let young children play with the appliance, or any part of
it, or the packaging!
1. Unpack the appliance carefully.
2. Check that no parts are damaged or missing (see: ‘Knowing Your Design Toaster
Pro 2S’).
3. Carefully remove all shipping materials and promotional materials. However, DO
NOT remove the model label at the bottom of the housing.
WARNING:
Always switch OFF (press the CANCEL button), unplug, and leave
the appliance cool down, before cleaning. Do not immerse the housing or power
cord in water or other liquids or spill any liquids on the housing or power cord.
Do
not place the housing or power cord in an automatic dishwasher.
4. Before first use and after a longer period of storage, clean the appliance and its
parts (see: ‘Care and Cleaning’).
IMPORTANT:
The first few times you are using the appliance, you may notice a
slight odour and a little smoke escaping from the bread slots. This is because some
extent material derived from the manufacturing process is burnt off. This is normal
and will disappear soon.
5. Turn on the appliance and allow it to complete an entire toasting cycle with brow-
ning level 5 without any bread slices in the bread slots to remove any residues
from the manufacturing process (see: ‘Operation’).