8
9
- +
1. Pull out the crumb tray and empty the crumb tray. Remo-
ve any remaining residues with a soft damp cloth. Then
wipe dry.
2. Clean the exterior of the appliance using a soft cloth
slightly moistened with a little dishwater. Thereafter wipe
dry thoroughly.
3. Wipe the power cord using a clean moistened cloth.
4. If you have used the bun warmer, fold out the bun warmer by pres-
sing the bun warmer lever down. Carefully wipe the wires of the bun
warmer with a soft damp cloth to remove any crumbs sticking to the
wires. However, ensure not to damage the wires of the bun warmer when
doing so.
IMPORTANT SAFEGUARDS FOR ELECTRICAL APPLIANCES
The appliance is heated electrically. Place the appliance near a suitable
wall power socket to connect the appliance directly to a protected mains
power supply with protective conductor (earth/ground) connected pro-
perly. Ensure that the voltage rating of your mains power supply corre-
sponds to the voltage requirements of the appliance (220-240 V, 50/60
Hz, AC, rated for at least 10 A).
The installation of a residual current operated circuit breaker (r.c.c.b.)
with a maximum rated residual operating current of 30 mA in the supp-
lying electrical circuit is strongly recommended. If in doubt, contact your
electrician for further information.
In various foreign countries, the specifications for power supplies are sub-
ject to incompatible norms. Therefore it is possible that power supplies in
foreign countries do not meet the requirements for safe operation of the
appliance. Thus, before operating the appliance abroad, ensure that safe
operation is possible.
• Do not use any desk top multi socket outlet, external timer, extension
cord, or remote control systems.
• Always handle power cords with care. The pins of the power plug
must be smooth and clean. Always completely unwind the power cord
before use. Do not place the appliance on a power cord. Power cords
may never be knotted, twisted, pulled, strained or squeezed. Do not
let the plug or power cord hang over the edge of the table or counter.
The power cord may not touch hot surfaces or sharp edges. Ensure
that no one will pull the appliance by the power cord. Take care not
to entangle in the power cord. Always grasp the plug to disconnect
the power cord. Do not touch the appliance or power plug with wet
or damp hands when the appliance is connected to the power supp-
ly. Do not wind the power cord around the appliance with the appli-
ance still hot.
• DO NOT drip or spill any liquids on or in the housing or power cord.
HIGH TEMPERATURES—RISK OF BURNS
CAUTION: HOT SURFACE!
• The Design Toaster Pro 2S is designed for heating bread.
For this purpose, the heating elements within the bread slots are hea-
ted up to very high temperature. Thus, improper handling could cause
severe injuries and damage. Please keep this in mind to avoid scalds
and damage.
• The heating elements and even the housing of the appliance can get
very hot during operation and thereafter. Additionally, during opera-
tion hot steam could escape from the bread slots. Do not touch the
hot surfaces with any parts of your body or any heat-sensitive objects
during operation or when the appliance is still hot. Only touch the
appliance and its parts at the operating elements during operation
and shortly thereafter. Do not place any foreign objects (e.g. dishes,
tablets) on the appliance.
• Do not operate the appliance without the crumb tray properly in
place.
• Do not move the appliance when it is still hot. Always leave the appli-
ance and all its parts cool down before moving or cleaning the appli-
ance. Do not place the appliance on heat-sensitive surfaces for ope-
ration or when it is hot.
•
DO NOT heat any alcoholic foodstuffs on the appliance to avoid risk
of explosion and fire.