71
The values you had set when starting the “Custom” program will be kept in memory
even after switching off and unplugging the appliance.
Note
After the set cooking time (“Steeping”) elapsed, the appliance will switch to the keep
warm function (“Warm”), keeping your meal warm for additional 60 minutes. However,
the temperature for the keep warm function is limited to 80°C at the maximum.
Important:
Please keep in mind, that the recent settings will be overwritten by any
new values you have set when starting the “Custom” program again.
1. Ensure that glass insert and glass lid are clean and undamaged. There may be
no cracks and chipped edges. If required, sterilize the glass parts via hot water
before filling in your food.
2. Fill 500 ml to 1100 ml of clear tap water into the kettle and place the kettle onto
the power base.
3. Fill the prepared food into the glass insert. However, do not fill in more than
480 ml. Then close the glass insert via the glass lid.
4. Place the glass insert lid ring (large opening) onto the work space and place the
glass insert into the central opening of the lid ring.
5. Then lift the lid ring by both handles. With the glass insert hanging in the lid
ring, slowly lower the glass insert into the kettle until the lid ring rests on the rim
of the kettle. Close the opening of the lid ring via the large stainless steel lid of
the glass insert lid set.
6. Press the “Hot water/Cooking” button repeatedly until “Custom” is indicated at
the lowest line of the display. The recently used temperature is displayed.
7. To adjust the temperature, turn the “°C/Time” knob until the required temperature
is shown on the display. You can set the temperature in the range of 40°C to
100°C.
8. Press the “°C/Time” button to display the set cooking time. Turn the “°C/Time”
knob until the required value is shown.
Note
You can set the cooking time from 30 seconds (“0m30s”) to 12 hours (“12h00mm”).
Using the “°C/Time” button, you can toggle the parameters as you like. After 6
seconds without any actions, the appliance will switch back to the normally dis-
played parameter.