47
SOLVING PROBLEMS
If any problems occur during operation, you will find solutions in this section. Further infor-
mation on processing your food is given in section ´Tips for Best Results`.
Problem
Reason
The Solution
The appliance does not respond,
when pressing the ON/OFF button.
The screen remains dark.
The appliance is not live.
Please check:
• Is the appliance connected to the power
supply?
• Is the power outlet live?
• When using an extension cord: check the
extension cord for proper operation (e.g. by
connecting a lamp).
The oil tray is in wrong
orientation.
Remove the grilling top and turn the oil tray
over. The letters on the oil tray must be in
correct orientation (NOT upside-down or mir-
ror-image). Insert grilling top and try again.
TThe grilling top is not assembled correctly.
The grilling top can only be operated in one
orientation.
Turn the grilling top by 180°.
The screen shows RAC and CAP in
rotation.
You have selected the probe mode without
temperature probe connected.
• If you do not wish to use the temperature
probe: press the mode button, or simply wait
for about 30 seconds.
• If you wish to operate the appliance in pro-
be mode: connect the temperature probe.
You changed the temperature set-
ting, but there is no response of
the heating system.
The control unit is switched to probe mode.
You CANNOT change the set temperature of
the grilling area with the control unit in pro-
be mode (probe icon on the screen).
Press the mode button to switch back to nor-
mal mode. Then try again.
After giving an acoustic signal, the
appliance shuts off.
The time-out function is active. For your
safety, the appliance switches OFF automa-
tically after 2 hours
To reactivate the appliance, simply press the
ON/OFF button. If you do this within 10
seconds, the selected temperature values will
be maintained.
CARE AND CLEANING
WARNING:
Always switch OFF the appliance (press ON/OFF button), then unplug
the appliance, and wait until the grilling area cooled down (at least 45 minutes), before
moving, disassembling, or cleaning the appliance. Do not attempt to move the appliance
with fat and juices in the oil tray still hot! Otherwise, hot fat could be spilled, causing severe
injuries and damage.
CAUTION:
Keep in mind that fat and juices could drip especially from the grilling top,
when removing the grilling top. Keep delicate objects in sufficient distance. Do not place
the appliance or any parts of it on surfaces that are sensitive to heat, fat or moisture. Do not
use any abrasive cleaners or corrosive chemicals (e.g. bleach) for cleaning the appliance
or any parts of it, to avoid damage to the surfaces. Do not use any hard or sharp-edged
objects for cleaning any surface of the appliance. Do not immerse the housing or control
unit of the appliance, or the handle, cable or plug of the temperature probe, or the power
Summary of Contents for Design Table-Top Grill Advanced
Page 55: ...55...
