background image

Never

put your hands, wooden spoons or other foreign substance (such as hair,

cloth, brush, towels) into the 

Coffee Bean Container 

when the motor is running or the

appliance is connected to the power outlet. 

• Only store the appliance completely assembled. This way all the parts of the
appliance are protected.

NOTE:

Ensure the appliance is properly assembled before putting the plug into the

power outlet. Never turn the appliance on without the lid on the 

Coffee Bean Container

. If

any foreign substance blocks the Grinding Gear turn the appliance ´OFF`, press the start-
/stop-button or turn the Time Selector Dial to ´O` to avoid overheating. Never touch the
Grinding Gear when the plug is connected to the power outlet. Take the appliance to an
authorised service centre for examination and repair.

• The appliance is designed for normal household quantities. Do not operate this
appliance for longer than 2 minutes at a time as this could cause overheating. Allow
to cool for at least 2 minutes after each use. Allow appliance to cool down for 10-15
minutes after long operation.

Important Safeguards for all Electrical Appliances

• Always operate the appliance near a suitable wall power outlet and connect the appliance
directly to the power outlet. Do not use any extension cords or a multiple desk outlet.

• Ensure that the voltage rating of your mains power supply corresponds to the voltage
requirements of the appliance (220/230 V, 50 Hz, AC). Always connect the appliance
directly to a mains power supply wall socket with protective conductor (earth/ground)
connected properly. The installation of a residual current safety switch with a maximum
rated residual operating current of 30 mA in the supplying electrical circuit is strongly
recommended. If in doubt, contact your local electrician for further information.

Do not 

leave the appliance unattended while connected to the power supply.

Always turn the appliance ´OFF` and 

IMMEDIATELY 

unplug the appliance after

operation and if it is not in use (even for a short break) and before cleaning and/or
assembling or disassembling. Always grasp the plug to disconnect the appliance from
the power outlet.

• Always handle the power cord with care. 

Do not 

pull or strain the power cord.

The power cord may never be knotted or squeezed. 

Do not

let the power cord

hang over the edge of the table or counter. Take care not to entangle in the power
cord. 

Do not 

touch the appliance, with wet hands, to avoid risk of electric shock.

Do not 

touch the appliance, if it is damp or touching a wet surface, while connected to

the mains power supply. In this case, immediately unplug the appliance and dry the
appliance (see ‘Care and Cleaning’). 

17

42602_DesignKaffeemuehleAdvanced_Manual.qxp  12.01.2007  13:37  Seite 17

Summary of Contents for Design Coffee Grinder Advanced













Reviews: