background image

14

Important Instructions

WARNING:

To avoid injury to persons and damage, always turn the appliance ´OFF`,

wait for the motor to stop completely and unplug, immediately after use and before
assembling/disassembling or cleaning. Never use force operating, assembling or
disassembling the appliance. 

WARNING: 

If the coffee bean container is positioned on the motorblock, and the

plug is connected to the power outlet, do not insert your fingers, a wooden or plastic
spoon or similar cooking utensils or foreign substances in the Coffee Bean Container. 

Never turn the appliance on without the lid on the Coffee Bean Container

Never touch

the Grinding Gear when the plug is connected to the power outlet. 

• The appliance has a circuit breaker. If the 

Coffee Bean Container

and the Coffee

Container are not in proper position you can not turn the appliance on.

WARNING: 

Ensure the Coffee Bean Container is locked securely in position before you

fill in the coffee beans.

The bottom of the 

Coffee Bean Container

is open. Lifting the

Coffee Bean Container

the content falls out.  

WARNING: 

Do not overfill the Coffee Bean Container.

Pay attention to the ´MAX

FILL` mark on the 

Coffee Bean Container

.

IMPORTANT:

Do not forget to empty the Coffee Container when grinding coffee

beans.
• The Coffee Grinder will not grind food that is sticky or extremely hard i. e. chocolate,
cheese, whole nutmeg, candied fruits, etc.

ATTENTION: If the Coffee Bean Container is filled with coffee beans you

can only change the Ginding Selector setting while the motor is running!

• The Coffee Grinder will not make pastes of any fruits, seeds or herbs ie. curry
pastes, nut batters. 
• Do not move the appliance 

while operating to avoid personal injury.

• Do not operate this appliance for longer than 2 minutes at a time as this could
cause overheating. Allow to cool for at least 2 minutes after each use. Allow appliance
to cool down for 10-15 minutes after long operation.

CAUTION: DO NOT

clean the Grinding gear with water. Water will damage the

Grinding Gear and motor housing and units might rust.

CAUTION: DO NOT

place the appliance or any parts of it in an automatic dishwasher.

• 

The appliance is for household only.

42602_DesignKaffeemuehleAdvanced_Manual.qxp  12.01.2007  13:37  Seite 14

Summary of Contents for Design Coffee Grinder Advanced













Reviews: